Grid Engineering

Added Wire Cutter Function

Custom wire properties added to Grid Engineering Custom wires can now be added through datapacks or KubeJS. Available properties: - name The display name of the wire. Used in item names, Jade, and tooltips. - voltage The maximum voltage tier the wire can handle. Examples: LV, MV, HV, SHV, CHV If voltage values are changed in the config, custom wires using tier names will automatically use the updated values. - base_amps / .baseAmps() The amperage capacity of the 1mm version of the wire. Larger wire thicknesses automatically multiply this value. Example: if base_amps is 4: - 1mm: 4A - 2mm: 8A - 4mm: 16A - 8mm: 32A - 16mm: 64A - loss_per_meter_per_amp_ppm / .lossPerMeterPerAmpPpm() Power loss per block per ampere, measured in ppm. - 10000 = 1% - 5000 = 0.5% - 2000 = 0.2% - color / .color() The render tint color of the wire. Examples: - "0xff00ff" - "#ff00ff" - 0xff00ff - only_one / .onlyOne() / .onlyone() By default, custom wires generate 1mm, 2mm, 4mm, 8mm, and 16mm variants. This option makes the wire generate only one thickness variant. - mm / .mm() Sets the thickness used when only_one is enabled. Valid values: 1, 2, 4, 8, 16 - coated / .coated() Also generates coated versions of the custom wire. Coated wires render thicker and use the normal coated-wire loss behavior. KubeJS example: js GEEvent.wire(event => { event.create("example_wire") .name("Example Wire") .voltage("HV") .baseAmps(8) .lossPerMeterPerAmpPpm(2500) .color(0xff55aa) .coated() }) Datapack JSON example: json { "name": "Example Wire", "voltage": "HV", "base_amps": 8, "loss_per_meter_per_amp_ppm": 2500, "color": "0xff55aa", "coated": true }