Tags
Creators
Details
Licensed LGPL-3.0-only
Published 2 years ago
All versions
0.0.1.6-3
Beta
0.0.1.6-32 months ago 7
Compatibility
Minecraft: Java Edition
1.21.1
Platform
NeoForge
Supported environments
Client and server
Changes
v0.0.1.6-3 | commit b7b55c9
- License changed from MIT to LGPL-3.0-only.
- 授權條款由 MIT 更改為 LGPL-3.0-only。
- Aspect Convergence Array structure redesigned: corner pillars now placed at 6-block diagonal distance (±3, ±3) instead of ±1. Structure now requires 5 Aspect Pedestals: one directly below the altar core (catalyst slot), and one each to the north, south, east, and west.
- 本源聚陣結構重新設計:角落柱子移至對角 ±3 距離。現在需要 5 個本源底座:核心正下方(催化物槽)+ 東西南北各一。
- Structure Build Wand now also places Aspect Pedestals at the required positions. It can pull pedestals directly from your inventory — no need to place them one by one manually.
- 結構建造法杖現在也可以在必要位置自動放置本源底座,直接從背包取用,不需要逐一手動放置。
- Seal rune symbols float near each corner pillar whenever the altar is formed, visible from all four sides of the pillar.
- 本源聚陣成形後,四個角落柱子旁會顯示浮空封印符文,每個柱子的四個側面都可看到。
- Energy beams connect the corner pillars to the altar core during an active ritual.
- 儀式進行中,角落柱子與核心矩陣之間會出現能量光柱。
- Solar core glow effect now renders above the altar when Dyson Ring tier reaches T3 or higher. The glow fades in as you step back and disappears when you get close.
- 戴森環升級達到 T3 以上時,祭壇核心上方會出現太陽核心輝光效果,靠近時淡出,退後時漸顯。
- JEI multiblock structure guide now shows an isometric 3D preview of the full altar layout instead of flat per-layer diagrams.
- JEI 多方塊結構指南改為等角 3D 預覽,直接呈現整體祭壇擺放樣貌,不再是分層平面圖。
- Mana Infuser now processes Refined Mana Dust into Mana Crystal Fragments (3 dust → 1 fragment, 4200 mana).
- 魔力注入機現在可將精煉魔力粉轉化為魔力水晶碎片(3粉→1碎片,消耗 4200 魔力)。
- Added crafting recipes for all four Mana Generator upgrade modules: Accelerated Processing, Expanded Fuel Chamber, Catalytic Converter, and Diagnostic Display.
- 新增四種魔力發電機升級模組的合成配方:加速處理、擴充燃料室、催化轉換器、診斷顯示。
- Mana Grinder, Mana Infuser, and Mana Crafting Table now support upgrade modules. Use the Basic Tech Wand on any of these machines to open the upgrade GUI.
- 魔力研磨機、魔力注入機、魔力合成台現在支援升級模組,使用基礎科技魔杖對機器按右鍵即可開啟升級介面。
- Mana Grinder and Mana Infuser support Speed upgrades (faster processing) and Efficiency upgrades (lower mana cost). Mana Crafting Table supports Efficiency upgrades only.
- 魔力研磨機與魔力注入機支援速度升級(加快處理)與效率升級(降低魔力消耗);魔力合成台僅支援效率升級。
- Mana Grinder recipes overhauled: Raw Mana Dust now grinds into Mana Dust ×2 (more efficient than smelting); Corrupted Mana Dust ×2 purifies into Mana Dust ×1; added cobblestone→gravel, gravel→sand, bone→bone meal ×4, blaze rod→blaze powder ×4.
- 魔力研磨機配方大幅調整:原魔塵現在可研磨出魔力粉 ×2(比熔爐更有效率);汙穢魔力粉 ×2 可淨化成魔力粉 ×1;新增圓石→碎石、碎石→沙子、骨頭→骨粉 ×4、烈焰棒→烈焰粉 ×4。
- Added new T1 research: Mana-Forged Tools — unlocks the concept of mana crystal tools and the Basic Tech Wand. Requires Mana Crystallisation.
- 新增 T1 研究節點「魔力鍛造工具」,解鎖魔力水晶工具與基礎科技魔杖的使用概念,前置條件為魔力晶化。
- Mana Pickaxe now chain mines up to 32 connected ore blocks. Hold Shift to mine single blocks.
- 魔力鎬現在可連鎖挖掘最多 32 個相鄰礦石方塊。按住 Shift 可單格挖掘。
- Ink Quill no longer breaks when durability runs out — it locks instead (glows, durability bar fully depleted). Locked quills cannot be used and must be refilled.
- 墨水羽毛筆耗盡時不再消失,改為鎖定狀態(閃光、耐久條全紅)。鎖定狀態無法使用,需補充墨水。
- Added Ink Quill refill recipe: combine any Ink Quill (any durability) with an Ink Sac in the crafting grid.
- 新增墨水羽毛筆補充配方:任意耐久的墨水羽毛筆 + 墨囊 = 全新羽毛筆。
- Added Aspect Convergence Array (multiblock altar) ritual crafting system. Place catalyst on altar, items on 4 diagonal pedestals, right-click to start ritual. Result drops above the altar when complete.
- 新增本源聚陣儀式合成系統。將催化物品放在祭壇上,材料放在四個底座,空手右鍵觸發儀式,完成後結果掉落於祭壇上方。
- Added Jade support for Aspect Convergence Array: shows structure status, catalyst, and pedestal fill count in the overlay.
- 新增本源聚陣的 Jade 支援:準星對著祭壇會顯示結構狀態、催化物品及底座填充數。
- Research Table now uses BlockEntityRenderer (BER) instead of a standard block model, fixing glass transparency and z-fighting issues.
- 研究台改用 BlockEntityRenderer 渲染,修正玻璃透視與 Z-fighting 問題。
- Nara Holographic Watch now has a crafting recipe (4 gold ingots + 4 copper ingots + 1 mana dust). This is the entry point to the entire research system.
- 娜拉全息手錶現在有合成配方(4金錠 + 4銅錠 + 1魔力粉),這是整個研究系統的起點。
- Added multiblock framework (IMultiblockController / IMultiblockPart / MultiblockPattern) as the foundation for all future multi-block machines.
- 新增多方塊框架(IMultiblockController / IMultiblockPart / MultiblockPattern),作為所有未來多方塊機器的基礎。
- Aspect Altar core now animates as a floating Rubik's cube when formed: 9 face slices cycle one at a time, each rotating 90° and pausing before the next, while the whole structure floats and tilts slowly.
- 本源聚陣核心成形後呈現懸浮魔術方塊動畫:9個切面依序輪流旋轉90°並暫停,同時整體緩慢浮動傾斜自轉。
- Altar Pillar block now uses a custom OBJ model with a dedicated texture.
- 矩陣柱現在使用自訂 OBJ 模型與專屬貼圖。
- Aspect Pedestal now uses a custom model with a dedicated texture; displayed items are better positioned and sized.
- 本源底座現在使用自訂模型與專屬貼圖;物品顯示位置與大小已優化。
- Aspect Convergence Array Rubik's cube animation is now ritual-only: during a ritual all 9 face slices rotate; otherwise the core just slowly spins in place.
- 本源聚陣魔術方塊動畫改為僅儀式進行時才切面輪動,平時只做緩慢自轉。
- Aspect Convergence Array structure formation now requires using the Advanced Tech Wand — it no longer forms automatically. A short ascending chime plays on successful formation.
- 本源聚陣結構成形現在需要使用進階科技法杖觸發,不再自動成形,觸發成功時播放上揚音符盒音效。
- Added Advanced Tech Wand and Structure Build Wand items.
- 新增進階科技法杖與結構建造法杖物品。
- Aspect Convergence Array now supports Dyson Ring upgrades (T1–T6, up to T12 planned): surround the altar with Resonance Rings to gain upgrade tiers. Each tier adds a glowing ring that rotates around the altar core.
- 本源聚陣現在支援戴森環升級(T1–T6,最高 T12 規劃中):在祭壇周圍放置共鳴環即可獲得升級階級,每個階級都會增加一個繞核心旋轉的發光環。
- Pedestal scan radius increased from 4 to 6 blocks.
- 底座偵測半徑從 4 增加到 6 格。
Projects on Modrinth are automatically available through a Maven repository for use with JVM build tools such as Gradle. To learn more about the Modrinth Maven API, click here.
Note: When available, you should use the creator's maven repo instead as it will have transitive dependency information that the Modrinth Maven API does not. You may also end up with duplicate dependencies if you use a mix of Modrinth and non-Modrinth Maven repositories for your dependencies, because the group identifier will be different when served through the Modrinth Maven API.
Maven coordinates:
Version ID:
build.gradle:
repositories {
exclusiveContent {
forRepository {
maven {
name = "Modrinth"
url = "https://api.modrinth.com/maven"
}
}
// forRepositories(fg.repository) // Uncomment when using ForgeGradle
filter {
includeGroup "maven.modrinth"
}
}
}
// Standard Gradle dependency
dependencies {
implementation "maven.modrinth:x9pJj8Sv:segNBbM7"
}
// Legacy Loom dependency
dependencies {
modImplementation "maven.modrinth:x9pJj8Sv:segNBbM7"
}

