1.0.0
Compatibility
Required content
Changes
A NeoForge 1.21.1 mod that adds an Ember Burner to Create — a burner powered by Embers Re-Ignited ember energy.
It is an addon for More Burners, built on its burner framework (BaseBurnerBlock / BaseBurnerBlockEntity), and can fuel any Create machine that needs heat — basins, boilers, and more — as an alternative to the Blaze Burner.
Features Ember-powered: The burner consumes Ember Energy to heat up gradually, providing Create's standard heat levels (Smouldering → Kindled → Seething). Once lit, it supplies full heat to boilers as well; Huge capacity: 6000 ember, consuming 1 ember per tick (stops heating and slowly cools down when ember runs out); Ember sharing: Horizontally adjacent Ember Burners automatically equalize their ember reserves, keeping an array uniformly fueled; Bellows interaction: Pair with an Atmospheric Bellows to exceed the heat cap: Bellows position Max heat Heating/cooling rate None 300 ×1 Adjacent (facing) 400 (reaches Superheated/Seething) ×2 1 block away (through a block) 340 ×1 Input from any side: Ember can be fed through Embers' Ember Receptor from any of the four horizontal directions; Information display: Supports Create's Goggles (shows ember consumption per second) and Embers' Dial (reads current/max heat); Cover detection: When covered on top, spark particles stop (the block list is configurable via More Burners' client config); Bilingual: Built-in Simplified Chinese (余烬燃烧室) and English (Ember Burner) language files. Configuration
All values can be adjusted via config/morecreateburnerswithemberburner-common.toml — no restart needed, changes take effect immediately:
Key Default Description [ember_burner] max_capacity 6000.0 Maximum ember capacity ember_cost 1.0 Ember consumed per tick heating_rate 1.5 Heat gained per second while consuming ember cooling_rate 1.0 Heat lost per second when ember runs out rate_multiplier 2.0 Heating/cooling multiplier with an adjacent bellows max_heat 300.0 Max heat without bellows max_heat_1 400.0 Max heat with an adjacent bellows max_heat_2 340.0 Max heat with a bellows 1 block away
Dependencies Mod Version Type NeoForge 21.1.244+ (MC 1.21.1) Required Create 6.0.10+ Required More Burners 1.21.1-0.3.6+ Required Embers Re-Ignited 1.21.1-1.5.7+ Required
License & Credits This mod is released under the MIT license; Built on More Burners' (MIT, by DragonEgg) burner framework, reusing its block models and textures — thanks to the original author; Uses Create's (MIT) heat source API and Embers Re-Ignited's (MIT) ember energy API.
Projects on Modrinth are automatically available through a Maven repository for use with JVM build tools such as Gradle. To learn more about the Modrinth Maven API, click here.
Note: When available, you should use the creator's maven repo instead as it will have transitive dependency information that the Modrinth Maven API does not. You may also end up with duplicate dependencies if you use a mix of Modrinth and non-Modrinth Maven repositories for your dependencies, because the group identifier will be different when served through the Modrinth Maven API.
Maven coordinates:
Version ID:
build.gradle:
repositories {
exclusiveContent {
forRepository {
maven {
name = "Modrinth"
url = "https://api.modrinth.com/maven"
}
}
// forRepositories(fg.repository) // Uncomment when using ForgeGradle
filter {
includeGroup "maven.modrinth"
}
}
}
// Standard Gradle dependency
dependencies {
implementation "maven.modrinth:ZhRM4CGa:THHJOFoY"
}
// Legacy Loom dependency
dependencies {
modImplementation "maven.modrinth:ZhRM4CGa:THHJOFoY"
}

