Tags
Creators
Details
1.5.0-beta.3+fabric-1.21.1
Compatibility
Required content
Changes
Pipster 1.5.0-beta.3
This is a beta. It contains everything that is planned for 1.5.0 so far and passed the automated release check, but it has not been played much yet. Back up your worlds before you try it. Worlds from 1.4.1 load without any conversion; going back from 1.5.0 to 1.4.1 is not supported (colours, items collected for a set and other new settings would be lost). Please report problems in the issue tracker with your Minecraft version, loader, other mods and, if nothing moves, the lines of the test run.
Client and server must use the same Pipster file. Mods built against the Pipster API keep working: the API is
unchanged (pipster-api-1).
Supported Minecraft versions
Minecraft 1.21.1, 1.21.11, 26.1 to 26.1.2, 26.2 and 26.3, each for Fabric and NeoForge: ten files, for example
pipster-1.5.0-beta.3+mc1.21.1-fabric.jar. New: 26.1 and 26.1.1 are back. One file per loader covers 26.1,
26.1.1 and 26.1.2 (...+mc26.1-26.1.2-...jar); it was tested unchanged on all three. Fabric files need Fabric API.
New
In-game guide
Pipster has its own guide in the game: 64 pages in 10 areas (getting started, pipes, ports, filters, tesseracts, the pulse amplifier, examples, troubleshooting, compatibility, recipes) with crafting grids and numbers taken from the mod.
- Open it with the guide key (default Z, rebindable under "Pipster"; labelled Y on a German keyboard), with the new Pipster Guide item (book + Copper Item Pipe), or with the ? tab of the port, tesseract and amplifier screens. Looking at a Pipster block opens its page.
- Search (Ctrl+F), favourites, back and forward. English, German, Portuguese (Brazil) and Spanish.
- Every player gets the guide item once, on the first join (server option
giveGuideOnFirstJoin). - Troubleshooting: "Why does my pipe move nothing?" step by step (mode, redstone, filter, block face, claims, loaded chunks, too slow, quarantine), each step with the status text the port screen shows.
- Examples: automatic storage, brewing stand, crafter chain, energy backup and a tesseract network across dimensions.
Network Analyzer
A new tool (Conduit Wrench + comparator + glass pane; the wrench is used up) that shows what a whole network does.
- In the hand: every pipe of the network you look at within 24 blocks shows a coloured dot: grey (nothing moved in the last 5 seconds), green, yellow, red (full: a bottleneck). The line above the hotbar explains the pipe you look at, for example "T2 segment at 100 %: limits the T5 network".
- Right-click opens a report: what the network delivered per second, the busiest pipes, blocked ports with the reason, setups that cannot work (an allowlist without an active rule, a quantity rule that does nothing in that mode, ...) and how often ports failed, by cause.
- The server measures a network only while someone holds the analyzer and looks at it. You only see networks at pipes where you may build.
- Network warnings: sneak + right-click a pipe with the analyzer to watch its network. The owner gets a chat
message when a pipe of that network stays full (95 % or more) for a minute, a port is quarantined or the network is
too large; at most one message per network every 10 minutes. Server options
networkWarnings,networkWarningSeconds,networkWarningCooldown.
Test run
Click the status line of a port. The port plays its next transfer through without moving anything and lists what the block holds, what the filter lets out, every target with what it would take, the slowest pipe and why nothing would move. At most once per second per player.
Quantity rules
- Refill (Precision Filter Card): type
16-64and press Qty until the number turns yellow: below 16 the target is filled up to 64, then it waits until it falls below 16 again. Machines get fewer, larger deliveries. - Minimum amount (Rule Card): a port starts only when its source can give at least this much, for example ores in
batches of 32. Click the number between - and + to switch between the port limit and the minimum amount
(shown as
≥32). It never makes anything faster and never bypasses a pipe's limit.
Cargo Loader
A new block that lets pipes fill and empty chest minecarts, hopper minecarts and chest boats.
- Put it under the rail (minecarts) or under water (chest boats). Pipes connect to it like a chest: an Insert port fills the vehicle, an Extract port empties it. Filters, quantity rules and priorities work as usual.
- It stores nothing itself; without a vehicle it is empty. A comparator next to it shows how full the vehicle is.
- Recipe: iron ingots around a hopper, a rail on top, a Copper Item Pipe below. Tip: a powered rail on the loader holds the cart until you power it.
- It looks only at the one block above it and never loads chunks. On NeoForge it also works with vehicles of other mods that offer their items to automation; on Fabric with vehicles that use the vanilla container.
Coloured pipes and cables
- Right-click a pipe with a dye to colour it; sneak + right-click recolours the whole connected run of the same
colour (one dye per started 8 pipes, at most
dyeNetworkLimitpipes). A water bucket or a sponge removes the colour, a water cauldron washes it off pipe items. - Two different colours never connect; uncoloured connects to everything.
- Crafting grid: 1 to 8 pipes of one kind and tier + 1 dye. Colours stay when pipes are broken, placed again and upgraded. Tesseracts join networks of any colour.
Crafter: complete sets only
A port at a crafter has a switch "Sets": items are collected in the port and go into the crafter only as a whole
set, so the crafter never starts with half a recipe. With a filter card, filter fields 1 to 9 stand for the grid slots.
Datapacks can add other blocks to #pipster:complete_sets.
Comparator on pipes
A comparator next to a pipe gives 15 when a port of that pipe cannot deliver because every target is full or there is none (issue #3); otherwise 0.
Settings screen
Pipster's settings can be edited in the game: through Mod Menu on Fabric, through the mod list on NeoForge. In single
player most settings apply when saved; on a server the screen is locked, and operators with pipster.admin reload the
file with /pipster config reload.
New models
- The Pipster Guide, the Conduit Wrench and the Network Analyzer are now real 3D models: a leather-bound book with copper fittings, an open-end wrench with a rubber grip, a handheld scanner with a load display.
- Both tesseracts have a new look: an open frame with a port plate on every side and a floating core with an animated glow (violet for Resonant, cyan for Quantum). They now give a little light (level 4); they still are a full block to walk on and to connect to.
Two new languages
Portuguese (Brazil) and Spanish for all game texts and the whole guide. They have not been proofread by native speakers yet; corrections are welcome.
New integrations (all optional)
- The One Probe: the same information as Jade and WTHIT (not on Fabric 1.21.11, where no build exists).
- EMI (1.21.1): drag items and fluids onto filter fields, like with JEI and REI.
- Mod Menu (Fabric): opens the settings screen.
- CC: Tweaked: new
getNetworkWarnings()reads the warning state of a watched network. - Tested with (no integration needed): Item Collectors (point it at a pipe and set that side to Accept), Industrial
Foregoing, Draconic Evolution, Modern Industrialization (its energy reaches Pipster cables in both directions only
with its setting
bidirectionalEnergyCompat=true). The chiseled bookshelf works with pipes.
Changed
- Ports set to "Both" no longer pass items back and forth (issue #4): what a Both port takes out goes to another block that would give it back only if that block's port has a higher priority. New status "Waiting: gives back only to a higher priority".
quarantineTicksapplies without a restart.
Fixed
- An Extract port whose filter lets nothing out of a full block showed "Source empty"; it now shows "Filter blocks".
- NeoForge 1.21.1: Pipster could not put anything into slots that take exactly one item (for example the chiseled bookshelf).
- Jade and WTHIT showed the default number of capacitor banks on servers with a different
amplifierMaxBanks.
Not in this beta yet
- No new performance measurement for 1.5.0 (it comes before the final release).
- The final release texts and store pages are updated with 1.5.0.
Compatibility
- Save format: only new optional keys (
sets,col,color,ql,min,refill,watch); the Cargo Loader saves nothing. Worlds from 1.4.1 load unchanged. - Every beta 3 file was started unchanged on each Minecraft version it covers (dedicated server, client and game tests), also together with the real partner mods that exist for that version, before upload. For 26.1 and 26.1.1 fewer partner mods have builds, so several integrations of the 26.1 to 26.1.2 files were tested on 26.1.2 only.
Projects on Modrinth are automatically available through a Maven repository for use with JVM build tools such as Gradle. To learn more about the Modrinth Maven API, click here.
Note: When available, you should use the creator's maven repo instead as it will have transitive dependency information that the Modrinth Maven API does not. You may also end up with duplicate dependencies if you use a mix of Modrinth and non-Modrinth Maven repositories for your dependencies, because the group identifier will be different when served through the Modrinth Maven API.
Maven coordinates:
Version ID:
build.gradle:
repositories {
exclusiveContent {
forRepository {
maven {
name = "Modrinth"
url = "https://api.modrinth.com/maven"
}
}
// forRepositories(fg.repository) // Uncomment when using ForgeGradle
filter {
includeGroup "maven.modrinth"
}
}
}
// Standard Gradle dependency
dependencies {
implementation "maven.modrinth:PS5z2s6a:fMLaYL3K"
}
// Legacy Loom dependency
dependencies {
modImplementation "maven.modrinth:PS5z2s6a:fMLaYL3K"
}

