Tags
Creators
Details
6.0.2+mod
Compatibility
Changes
[v6.0.2] - 2026-11-09 - Drains, lists and fixes
Fixed
-
The Data Handler shows every setting a block has, even one it was placed without. A block placed before a setting existed (an Item Pipe from before invert, a Tag Adder from before its tag list) did not carry it, and the Data Handler only listed what the block carried, so the setting could not be found or changed. Every setting of the block is now listed: one with a known starting value shows it, marked (default) (an Item Pipe's invert off, a Tag Adder's tags
["custom_tag"]), and any other is marked (not set). The first change writes it to the block, starting from that default: [Add] on a default list keeps its entry and adds yours. -
The Redstone Remote's channel prompt no longer cancels itself. Shift+RMB with the remote hands out the Input Form, and the prompt was being called off the moment it opened, with "Input cancelled." in chat and the book taken straight back. The game leaves a short-lived copy of any item it gives a player floating at their feet for the pickup animation, and that copy was being mistaken for the form being thrown away. It is now told apart from a real drop, so the form stays in hand until you write on it, drop it or put it away. The same fix covers any other text prompt opened by using an item.
-
A Liquid Drain beside a pool drains it. A drain put down next to a pool stands on the bank, one block above the water, and only looked at the six blocks touching it — so it still said
no_sourceand took nothing in, upright or not. It now also looks one block down and out from each side, which is where the pool is. -
The drain says why it is idle. Besides
no_source, the Goggles now showwaiting_for_sourcewhen only flowing water or lava is beside the drain (a small pool refilling the gap it just took from), andno_networkwhen the drain is not part of a network, instead ofnetwork_too_small.network_fullstill means the network has no room for a whole 5000 mL block. -
The tools see past redstone again. Since v6.0.1 the Data Handler, Clipboard, Wrench and Multimeter stopped at the first block in the way that was not air, water or grass, so aiming at a custom block over redstone dust, a repeater, a comparator, a torch, a lever, a rail, a carpet, a sign, a ladder, a flower and the like said "No custom block found". These small blocks are now looked past, as is any block you are standing in (an open door), and only a block that fills its space stops the look.
-
The Tag Remover's "clear all" leaves the pack's own tags alone. With an empty
tag, it used to wipe every tag off every matching entity except custom-block markers, including the pack's own skins, displays and multiblock markers (which then stopped working) and thera.tags on players. It now skips the pack's entities entirely, and on everything else removes every tag except thera.ones. -
The Wrench's [CYCLE] button changes the right block. With one custom block on top of another, clicking [CYCLE] in the menu of the upper one could change the setting of the block below it instead.
-
Ender vaults find their partner past a vault on another channel. A vault paired with the nearest receiving vault first and only then checked its channel, so when the closest one was on a different channel nothing moved at all, even with a matching vault further away. Item, Fluid and Power Vaults now pick the nearest vault that is on their channel.
-
Valves, the Liquid Filter and the EU Breaker ignore networks of another kind. A bridge counted any neighbouring network as a side to level. An Item Pipe next to a Liquid Valve was picked as the empty side and left the valve stuck on
blocked, and an EU Breaker beside a fluid pipe tried to push EU into it. Valves and the filter now only work between fluid networks (liquid or gas), and the breaker only between electric grids. -
Big worlds finish settling their networks after a load. Every loaded network is rebuilt once when the world loads or
/reloadruns, and in a world with well over a thousand loaded pipes, tanks and wires that single rebuild ran past the game's command limit and stopped half way, leaving some blocks out of any network until something else changed. The load now rebuilds a few hundred blocks every 5 ticks until all are done, and networks keep working with their contents while they wait. A rebuild that does get cut short is picked up by the next one.
Added
-
Tag Adder and Tag Remover take a list of tags. The new
tagsproperty holds up to 16 tags, edited one entry at a time in the Data Handler ([Edit], [Remove], [Add]). A Tag Remover removes every listed tag from the entities its selector matches and leaves their other tags alone; with an empty list it clears all of their tags except thera.ones, as an emptytagdid. A Tag Adder adds every listed tag. Like the selector, the list can only be changed by admins unless Players may edit entity selectors and tags is on. Every tag is checked again each time the block fires: one that is not allowed (anra.tag, a space) is skipped while the others still apply, and the Goggles show Refused tags: N until it is fixed. A list with only refused tags does nothing; it is never taken as "clear them all". -
The Tag Adder's and Tag Remover's Goggles show their selector and tags (Targets, and the first three tags then "+N more").
-
A powered Liquid Drain pours into thin air. Nothing has to be there already: it pours out of its front, the side it faces, like a dispenser, into air or anything a bucket would wash away (grass, flowers, a snow layer). Water, lava and powder snow come out as one source block for every 5000 mL, the same amount a drain takes in for one. Experience comes out as orbs, potions as a cloud in the potion's own colour, and milk, steam, smoke and oxygen are poured away as white drops, a cloud, smoke or blue mist. In the Nether water evaporates, as from a bucket: each block's worth hisses away and the Goggles say
evaporates. The Goggles saypouring, or why not:blocked,not_enough(less than a whole block of that fluid),network_empty. -
Show filter previews (your own settings,
/trigger ra.settings.open, on by default): whether the Goggles draw the item an Item Pipe filters for above its label. A Goggles label is one entity that everyone nearby sees, so it cannot be hidden from one player: a pipe draws its filter item while any Goggles wearer within range of it has the setting on. Turn yours off and you stop asking for previews, though you still see one drawn for another wearer beside you. Hover the setting's name in the menu for this explanation. The server-wide Filter previews switch (General › Goggles) still turns them off for everyone. -
"Show the load message" now silences the whole load message. With it off, a
/reloadno longer prints each module's "loaded!" line (Interactive blocks, Storage blocks, Sensors, Logic Gates, Wireless Redstone, Wires, Chunk Loader, Enchant crafting, Infinite generators, Jetpacks, Ender links) nor the version and settings lines. The notice that some block types are disabled still appears, since it is a warning rather than a greeting. -
On/off server settings read on / off in the settings pages and in the confirmation message, instead of
1b/0b.
Changed
-
List rows read [Add] [Edit all] [List], and start compact. A list in the Data Handler is one line now, its header: [Add] types one new entry for the end, [Edit all] (was "[Edit whole list]") writes the whole list at once in the input book, and [List] shows the entries underneath, each with its own buttons; click it again, or another list's, to fold it away. A list you may not change keeps its locked row, and its [List] shows the entries without buttons.
-
Tag Adders and Tag Removers placed from now on start with
tags: ["custom_tag"], a list of one tag, instead oftag: "custom_tag". Blocks you already placed are converted when the world loads: their tag becomes the list's one entry (tag: "red_team"becomestags: ["red_team"]), a Tag Remover without a tag, which cleared every tag, gets the empty list and keeps doing exactly that, and a Tag Adder without one gets the empty list and keeps adding nothing. The oldtagsetting is gone. -
The Data Handler's list button is [Add] (it was [Append]). It adds an entry at the end, also to an empty list, and asks for it in the input book, checked like any other entry. Once the list holds as many entries as it may (16 for a Tag Adder's or Tag Remover's tags), it is greyed out, and hovering it says "Maximum 16 entries". The list's header shows how full it is, like
tags: list (1/16). -
Liquid Drain
speedis nowrate, in mL per second (5000 by default, one block a second; 100 to 100000), and it sets how fast a drain takes in and pours out alike. Existing drains and the server default are converted when the world loads: a speed of 5 becomes a rate of 5000. -
Liquid Drains are silent. They no longer play a bucket sound each time they take in, pour out or empty a container.
Projects on Modrinth are automatically available through a Maven repository for use with JVM build tools such as Gradle. To learn more about the Modrinth Maven API, click here.
Note: When available, you should use the creator's maven repo instead as it will have transitive dependency information that the Modrinth Maven API does not. You may also end up with duplicate dependencies if you use a mix of Modrinth and non-Modrinth Maven repositories for your dependencies, because the group identifier will be different when served through the Modrinth Maven API.
Maven coordinates:
Version ID:
build.gradle:
repositories {
exclusiveContent {
forRepository {
maven {
name = "Modrinth"
url = "https://api.modrinth.com/maven"
}
}
// forRepositories(fg.repository) // Uncomment when using ForgeGradle
filter {
includeGroup "maven.modrinth"
}
}
}
// Standard Gradle dependency
dependencies {
implementation "maven.modrinth:52z5jQjy:dghAHJqv"
}
// Legacy Loom dependency
dependencies {
modImplementation "maven.modrinth:52z5jQjy:dghAHJqv"
}

