Compatibility
Minecraft: Java Edition
Platforms
Supported environments
Links
Creators
Details
Create: Odds 'N Ends
Four odd machines for Create. The copy lathe takes blocks and makes them into different shapes. The jacquard loom takes punched cards and weaves images. The barrel organ plays a punched track using pipes, drums and whistles. Finally, the CNC mill lets you run Create's deploying recipes and sequenced assemblies in one box.
All of them run on rotation and work with funnels and mechanical arms. You can hold W over any of them in your inventory to see their Ponder scenes.
Copy lathe
Take a block and make it into a baluster, vase, table leg or any shape you wish! The material will not change, so an oak log will become an oak spindle and quartz will become quartz. Blocks from other mods can also be used.
To make it:
- Add 3 lathe beds in a row with the headstock on one end and the tailstock on the other.
- Wrench the headstock. If any part is placed incorrectly you'll get a message telling you what's wrong.
- Use the template table to draw your desired shape onto the profile template. Each of the 16 bars is a separate layer.
- Right click the lathe with the template in your hand, then right click with your block. Spin the headstock.
If you want to make another of the same thing you've made, make a tracer set 2 blocks behind the lathe, with 3 rails and a holder on either end. Place your item into a holder and the lathe will mimic it, ignoring the template.
Jacquard loom
This weaves tapestries from a chain of punched cards. You draw your image on the card punch, punch the cards and weave them.
To make it:
- Make a frame from the loom frames, 3 wide, 3 high and 2 deep. The centre of the middle layer will be empty. On the bottom front corner place the loom drive. On the top back place the jacquard head.
- Wrench the head to assemble it. Spin the drive.
- Right click the card punch and draw your image, up to 3x4 blocks and 16 colours. Press save.
- Place blank cards into the punch (one per row) and spin it. This will give you a chain of cards.
- Place the chain and some wool into the loom. A block of wool will give you 256 pixels of fabric. If you run out of a colour the loom will pause until you add more.
You can hang the tapestry on a wall or lay it out as a rug. The chain stays in the loom, so you can keep weaving copies.
Barrel organ
Plays music from books using wind chests. The organ body itself does not make any noise. Connect wind lines from the copper port on the side to wind chests. Whatever is on the chest will play.
- Place the barrel organ (2 blocks high) and spin the back. The faster you spin, the faster it will play.
- Open up the card punch and select the Score tab. Draw your tune on the piano roll or import a MIDI file. Press save.
- Place blank cards in the punch (one per page) and spin. This will give you a book of music.
- Right click the organ with the book.
The box on the side will let you choose between Play once or Loop. The organ can be paused using redstone. If on Play once it will give a quick pulse at the end of your song.
You can put these on the wind chests:
- Steam whistle. Plays its own note. No boiler is needed. Toggle between exact pitch and any octave on the back of the chest.
- Reed pipe, wood pipe and reed box. Play every note the chest allows at real pitch. Up to 6 notes can be played at once.
- Kick and snare drums. Play their own lane of the score.
If you put a dye in the filter of the chest it will only play that voice. If there's nothing on the chest it will still blow its notes and give off redstone. This makes a line of chests turn your score into a sequencer for lamps or doors.
CNC mill
A 4x3x3 mill made from brass. To create the box, place CNC frames. On one of the short sides place the pendant in the centre. On the other place the CNC drive in the centre of the bottom. Wrench the pendant. Spin the drive.
By default this lets you run Create's deploying recipes and complete sequenced assemblies (that don't have any fluid steps). The assembly will cost 1 loop of parts and will be much faster than a Create line. Any tools that you would keep in a deployer (axes etc.) will need to be placed in the mill but will not be consumed. You can add your own recipes to the mill using the createoddsnends:cnc recipe type in modpacks.
Manually, you can press the pendant or click the front to open the doors. Place your parts in and take your finished items out (1 stack per click). The machine will not cut if the doors are open. To automate, place your parts in through the hatch on top. Finished items come out through the hatch on the pendant's end of the machine. Funnels, chutes, hoppers, arms and other mods' pipes will all work. Arms can also be used on the front. The mill finishes what it is cutting, then the doors open for the arm.
FAQ
What versions? NeoForge 1.21.1 with Create 6.0.10 or higher (6.0 line). I tested with 6.0.10
Do I need JEI/EMI? No. Both, or just one, will give you recipe pages for turning, punching, weaving and the CNC.
Can I customise the CNC?
Yes. In the server config you can disable the borrowed recipes by setting cnc.deploying and cnc.sequencedAssembly to false. You can also adjust how much the assembly costs with cnc.assemblyLoopsCharged and how fast it runs with cnc.assemblyStepTicks.
I've played older versions of Create: Cool Stuffs. Will my world break? No. Old blocks, items, designs and scores will transfer over.
Can I use this in a modpack? Yes! The code is MIT and the assets are All Rights Reserved (don't use the textures/models in your own mod).


