1. Fix crash when the game is launched without JEI installed
2. Add support for entity accelerators to deduct stored energy from Applied Flux
3. Optimize entity accelerator performance
4. Add Jade display for the number of channels used by the wireless transmitter
5. Wireless transmitter now supports binding with FTB Teams; different teams will no longer share frequencies
6. Channel card new feature: sneak + left-click to bind to team/UUID (binding required, otherwise cannot connect to wireless transmitter)
7. Added functionality: sneak + left-click with a wrench on the wireless transmitter to quickly adjust frequency
8. Fix issue where the name displayed when selecting a pattern provider is shown in the client language

1. Added: Assembly Matrix Upload Core (now you must insert this core into the Assembly Matrix to use the automatic pattern upload function).
2. Added: Channel Card – Right-click while holding the Channel Card to adjust its frequency. Insert the Channel Card into an AE device to automatically connect with this mod’s wireless transceivers on the same frequency.
3. Fixed: Error bookmarks when adding missing items to crafting plans involving fluids or Mekanism chemicals.
4. Fixed: Major bug related to “The Silence that Devours All Sounds.”
5. Fixed: Crash issue when the JEI mod is not present.

Sync with version 1.20.1 update
Fixed an issue with abnormal usage of the parallel processing unit
Fixed an issue where, when the wireless terminal is in the Curios slot, using the middle mouse button to pull items and jump to the ordering interface caused abnormal behavior

ExtendedAE-Plus-1.4.2 [Forge] Changelog

Added:

1. Added Entity Accelerator, capable of speeding up entities up to 1024x
   (configurable energy cost, blacklist, and extra consumption multiplier list in config file).
2. Added Entity Acceleration Card series, used to set acceleration multipliers for the Entity Accelerator.
3. Added item "Silence That Devours All", capable of storing up to 2.1 billion different resources,
   with no storage limit per resource (requires corresponding addon mods for gases and similar items).
4. Added F-key search support to the Extended AE pattern management interface.
5. Crafting plan interface now supports Shift + Click to cancel automatic addition of missing materials to JEI bookmarks.
6. Added AE Crafting Pause Check Threshold config option (default value: 100000).
7. Intelligent Series now supports Advanced AE Supplier.
8. Wireless Transceiver now supports renaming; Jade can display the main node name on sub-nodes.
9. When Intelligent Blocking is enabled, vanilla blocking is automatically activated.
10. Adjusted the pattern crafting quantity display limit.
11. Relaxed manual multiplication limit for Extended Supplier patterns.
12. Added a multiplication button to the ME Interface to multiply marked item quantities.

Fixed:

1. Fixed wireless transceiver channel limit and rendering issues.

fix some errors

1. Added a mod configuration for intelligent multiplication maximum limit.
2. Right-clicking the upload pattern search box can now clear the text.
3. When opening the pattern provider UI from the crafting monitor, it will automatically jump to the page where the pattern is located and highlight it with a rainbow effect.
4. The title of the pattern provider UI now displays the name modified by the player.
5. Added configuration: enable intelligent multiplication only when the output amount is at least X.
6. Fixed an issue where non-AE and EAE pattern providers could not distribute materials.
7. Fixed an issue where a blank recipe in the encoding terminal could not overwrite an encoded pattern.

ExtendedAE-Plus-1.4.0-fix Changelog

1. JEI Bookmarks: Bookmarks are now prioritized for pattern encoding matching (the earlier a bookmark appears, the higher its matching priority).
2. Configurable: Option to display “Written by <Player Name>” on encoded patterns.
3. Configurable: Smart Doubling Mode now supports round-robin distribution, improving load balancing and concurrency efficiency across multiple providers/targets.
4. Memory Card: Supports copying settings related to Smart Blocking and Smart Doubling.
5. Mapping: After adding a new mapping, its Chinese name will automatically be written into the search bar and immediately applied as a filter.
6. Configurable: Control whether the Pattern Management Terminal shows/hides slot rendering by default.
7. Bug Fix: Fixed model material rendering anomalies.

1. Add Intelligent Multiplication Mode (when enabled, regardless of the template size, the supplier will always dispatch the full required amount in one go. This can greatly reduce late-game order lag issues in GregTech modpacks).
2. Add a mod configuration UI to allow setting related property values.
3. Add an option in the supplier to enable/disable Intelligent Multiplication.
4. In the Extended Pattern Management Terminal, add a UI button that opens the UI of the machine linked to the corresponding pattern supplier.
5. Make the Transceiver compatible with Jade to display information.
6. In the Crafting Progress screen,
   • Shift + Left-click on a material → jump to the corresponding machine’s UI.
   • Shift + Right-click on a material → jump to the corresponding supplier’s UI.
7. Add a Pattern Supplier State Controller block. When connected to the ME network, it allows global adjustment of the three mode toggle states for all pattern suppliers in the network.

1. Fix the issue where the same block's multiple pattern providers may mis-select the provider.
2. Add to the ME Pattern Management Terminal: after searching, highlight matched slots with an 18x18 border and a rainbow flowing overlay.
3. Add support for uploading Forge Table / Stonecutter recipes in the Assembly Matrix.
4. Add display of the number of items craftable from patterns in AE2 and ExtendedAE Pattern Management Terminals, as well as in Pattern Providers.
5. Fix the issue where the Smart Blocking Button’s attribute values are not synchronized in multiplayer.
6. Add a series of Parallel Processing Units, up to 1024 parallel.
7. Add support for clicking the F key on JEI bookmarks to automatically search the item name in the AE Terminal.

ExtendedAE-Plus-1.3.2 Update Log

1. Fixed the function of the quartz cutting knife shift right-click to copy item names, and now supports copying sub-names of different processing recipe types in Gray's large machines.
2. Added a convenient mapping modification feature (enter the Chinese name of the mapping you wish to change below, click “Delete Mapping,” and then re-add the mapping).
3. Added an advanced blocking mode for suppliers: identical recipes will no longer block, allowing continuous distribution until the container is completely emptied after completing the recipe, at which point distribution will resume with the next recipe. (Supports input assemblies; settings within the input assembly's circuitry remain unaffected, but the catalyst slot cannot hold any input items owned by any template in the supplier. For example, if a template uses iron ingots to make iron plates, the catalyst slot cannot hold iron ingots.)
   4.3 This feature has compatibility issues with the Modernae mod; installing both simultaneously will not cause any issues, but the advanced blocking mode will become ineffective.
4. Advanced blocking mode requires both the original blocking mode and advanced blocking mode to be enabled simultaneously to take effect.
5. Modified wireless transceiver: Placement defaults to slave channel 1, and supports right-clicking with a wrench to lock. Once locked, the master/slave mode and channel cannot be modified.

ExtendedAE-Plus-1.3.0 更新内容

1. 新增功能：为 处理样板 添加快速上传功能。

2. 改进自动搜索逻辑：

   • 现采用 映射表 实现，更加高效与灵活。

3. 新增配置支持：

   • 可通过修改 /config/extendedae-plus/recipe_type_names.json 文件来自定义映射名称。

4. 默认行为优化：

   • 若不需要映射为其他语言，可直接使用，无需添加映射（默认使用英语）。

ExtendedAE-Plus-1.2.2 更新内容

1. 修复：上传样板到装配矩阵时偶尔出现失败的问题。

2. 新增 JEI 功能：

   • 按下 Shift + 左键 可自动将物品拉取到玩家背包中。
   • 若 AE 网络中没有该物品，但存在自动化合成方案，将自动跳转到下单界面。

3. 改进样板上传逻辑：

   • 装配矩阵中已存在的样板不会被重复上传。
   • 当写入重复样板时，会在左下角提示玩家。

4. 修复：一个可能导致偶然崩端的问题。

ExtendedAE-Plus-1.2.1-fix 更新内容

1. 新增功能：在编码样板终端中编写合成样板时，可自动上传到装配矩阵

   • 前提：网络中必须存在装配矩阵。

2. 新增交互：鼠标中键点击某方块时，若 AE 网络中有该方块库存，将自动拉取到玩家手中。

3. 新增 JEI 支持：

   • 对着某个物品按下鼠标中键时，若 AE 网络中存在该物品的自动化合成方案，将自动跳转到下单界面。

4. 注意：上述第 2、3 条功能需随身携带无线终端（饰品槽同样有效）。

5. 优化交互逻辑，减少潜在 Bug 出现的可能。

6. 支持 Curios 槽位 使用通用终端，并可通过量子卡实现随时随地的下单与拉取。

ExtendedAE Plus-1.2.0-a 更新内容

1. 新增 无线收发器方块：

   • 支持无线传输 ME 频道，可跨纬度使用。
   • 注意：主方块所在区块需设置为强加载。

2. 操作方式：

   • 空手右键：切换主/从模式。
   • Shift + 右键：频道 +1。
   • Shift + 左键：频道 -1。
   • 主方块：发出信号；从方块：接收信号。

3. 修复 JEI 无法正常搜索到该物品的问题。

4. 无线收发器新增 抗卸载机制：

   • 解决此前每次重启需手动更新主端状态的问题。

5. 调整扩展样板管理终端：

   • 打开 UI 时默认隐藏所有样板。

ExtendedAE Plus-1.1.3更新日志：

1.配置文件中配置属性：pageMultiplier,可以更改扩展样板供应器的样板槽位数倍率

2.修复其他ae物品的ui显示异常问题

3.打开样板编码终端，自动填充空白样板（ae中得有空白样板）

1. 为 ExtendedAE 中的扩展样板供应器添加 UI 适配：
   超过 36 格时支持翻页功能，不会像从前那样渲染混乱。

2. 为 ExtendedAE 的扩展样板管理终端增加 隐藏所有样板按钮 功能。

3. 为扩展样板管理终端增加功能：
   点击高亮按钮后，按下 Shift + 左键 背包里的编码样板，可以直接将该样板上传到样板供应器。