# Create Plus Modpack # ZH ## 简介这是一个以机械动力为主的轻量级整合包，适用于1.20.1Forge和Fabric。偶尔会更新 ## 计划支持 | |**forge**|**fabric**|**neoforge**| | ---- | ---- | ---- | ---- | |**1.21**|待机械动力支持1.21forge后将会支持|待机械动力支持1.21fabric后将会支持|待机械动力支持1.21neoforge后将会支持| |**1.20.2~1.20.6**|因机械动力无计划支持1.20.2~1.20.6所以不支持|因机械动力无计划支持1.20.2~1.20.6所以不支持|因机械动力无计划支持1.20.2~1.20.6所以不支持| |**1.20.1**|完全支持|完全支持|完全支持| |**1.19.3&4**|因机械动力无计划支持1.19.3&4所以不支持|因机械动力无计划支持1.19.3&4所以不支持| | |**1.19.2**|未来可能支持|未来可能支持| | |**1.18.2及以下**|无支持计划|无支持计划| | ## 帮助 ### 怎么安装？整合包后缀为mrpack格式，直接将文件导入到启动器就行。 ### 许可证许可证未来可能为MIT，目前暂无许可证。 ## 特点 - 修改了默认设置，将渲染距离和模拟距离改为6。 - 关掉了垂直同步，并将帧率最大值拉到无限制。 - 将[Xaero's Minimap](https://modrinth.com/mod/xaeros-minimap)的地图位置放到了右上角，避免与帧率叠加。 - 左上角显示帧率和坐标。 - 按C键可以放大（有动画），鼠标滚轮来设置放大倍率。 - 等其他的设置（自己看）... ## 优化效果实测，作者的i5-6200渣机平均100FPS+。 ## 注 github上的备用下载源只包含1.1.0及以上版本。 ## 整合包版本

1.x.x

## 1.0.0 一切的开端。

# EN ## Introduction This is a lightweight modpack mainly based on mechanical power, suitable for 1.20.1 Forge and Fabric. It will be updated occasionally. ## Planned Support | |**forge**|**fabric**|**neoforge**| | ---- | ---- | ---- | ---- | |**1.21**|Will be supported after create supports 1.21 forge|Will be supported after create supports 1.21 fabric|Will be supported after create supports 1.21 fabric| |**1.20.2~1.20.6**|Not supported due to no plans for create to support 1.20.2~1.20.6|Not supported due to no plans for create to support 1.20.2~1.20.6|Not supported due to no plans for create to support 1.20.2~1.20.6| |**1.20.1**|Fully supported|Fully supported|Fully supported| |**1.19.3&4**|Not supported due to no plans for create to support 1.19.3&4|Not supported due to no plans for create to support 1.19.3&4| | |**1.19.2**|May be supported in the future|May be supported in the future| | |**1.18.2 and below**|No plans to support|No plans to support| | ## Help ### How to install? The modpack is in mrpack format, just import the file into the launcher. ### License The license may be MIT in the future, currently there is no license. ## Features - Modified default settings, changed render distance and simulation distance to 6. - Turned off vertical sync and set the maximum frame rate to unlimited. - Placed the map position of Xaero's Minimap in the upper right corner to avoid overlapping with the frame rate. - Display frame rate and coordinates in the upper left corner. - Press the C key to zoom in (with animation), use the mouse wheel to set the zoom level. - Other settings (check them yourself)... ## Optimization Effect Tested, the author's i5-6200 low-end machine averages 100FPS+. ##Note: The backup download sources on GitHub only include versions 1.1.0 and above. ## Modpack Version

1.x.x

## 1.0.0 The beginning of everything.

qiubobo114514

Organizations